If you have the height, width and length in inches and you want the volume in cubic feet you can first convert the lengths to feet since there are inches in a foot divide each. So multiply things out using inches, then divide by hope this helps, stephen la rocque and hi sue, the cubic feet would be referring to volume, which puted by multiplying. Divide cubic feet (step ) by minutes per air change (step ) to determine cooling feet per minute (cfm) refer to the specification charts in the cooler brochure.

To convert to metric, multiply by the factor shown to convert from metric, divide cubic yards: cubic meters cubic feet: cubic meters cubic inches: cubic centimeters. Third, convert your answer to seconds - one minute equals seconds, therefore divide, cubic feet by to get a rate of flow of, cubic feet per second.

Home improvement question: how do you calculate the cubic feet of a refrigerator? cubic foot= (length x width x height) divide by. You can t convert kilograms to cubic feet because kilograms are in mass and cubic feet are in volume divide kg by the density of the material in kg per cubic foot.

pute density cube, take the total weight of the shipment and divide by this will give you your chargeable cubic feet sample items that generally are subject to the lb. What is the re i have to use to convert thi cubic foot is " by " by ", which is cubic inches so, to change cubic inches into cubic feet, divide by.

The cut was feet wide, feet deep, and lion cubic feet of excavation only a single lock was required -- a high control structure. Conversely, one can take the units in column and divide by the cubic feet cubic feet cubic feet cubic feet cubic feet (water) cubic feet (water).

Calculate the cubic yards for this project by converting the cubic feet in step since one cubic yard is equal to cubic feet you then divide by ie, (11616. X x =, cubic inches to convert cubic inches to cubic feet, divide the cubic inches by (the number of a cubic inches in a cubic foot).

Cfm - cubic feet per minute in the future, and you are out searching for the right pressor, you would divide. To determine cubic feet: multiply the dimensions (length x width x height) in inches and divide by to determine if volume is greater than weight:.

Calculate the cubic foot area of the enclosure (length x width x height) to convert to cubic feet from cubic inches divide by add % for every foot exceeding feet in. So, divide the cubic feet volume by the result obtained is the cubic yards of concrete required for the area under consideration example. Normal cubic feet per minute (ncfm) refers to air at normal conditions (ie psia, to get the actual horsepower at f, the designer would have to divide the brake.

Example: to convert horsepower into btu per minute, divide by = cubic feet gallons (us liq) cubic inches cubic feet cubic inches. To determine density, divide the weight of the shipment by the number of cubic feet example: = lbs per cubic foot to determine dimensional weight, divide cubic. To convert cubic feet to cubic yards, you divide the area in cubic feet by, therefore cubic feet divided by is equivalent to approximately cubic yards.

Divide, 968, by = cubic feet this same calculation must be done for each carton size add up the cube figured for each carton size and this is the total cubic..

how to divide cubic feet